Horisontal finer slicer tre vertikal finer slicer finer slicer maskin kryssfiner produksjonslinje
Veneer slicer is mainly for slicing solid wood, engineer wood and other composite board, working efficiency is high, and veneer thickness is uniform. It is widely adopt in decorative veneer of plywood, furniture, flooring, construction industry and so on.
Beskrivelse
Horizontal veneer slicer wood vertical veneer slicer veneer slicer machine plywood production line
Horizontal veneer slicer wood vertical veneer slicer veneer slicer machine kryssfiner produksjonslinje,horizontal wood slicing 4*8 engineer wood block veneer slicer machine
1 Double V-chutes are used for both sides the machine, with high parallel; special polymer wear-resistant material coated on the surface.Machine runs in higher stability and with less friction.
2 Serve motor control system is used for timber feeding, guarantees the veneer thickness in a high precision, avoiding blade scratch on the timber.
3 Whole casted beam holds the log strongly, and hydraulic driven hooks clamp the log tightly and effectively. Vacuum disc system is used inside the log beam to help holding the big timber in order to avoid logs deforming or dropping down during cutting procedure
4 All switch button are gathered in a cabinet.Single person can operate the machine avoiding the dangerous caused by fault.
5 Special designed big size driving gear runs smoothly with a low noise when it runs high speed.
wood slicing vertical veneer slicer machine,veneer slicer machine plywood production line,veneer slicer machine,engineering wood block veneer gurjan veneer slicer,wood veneer slicer machine,woodworking machines veneer slicer.
SPECIFICATIONS FOR HORIZONTAL VENEER SLICER | |||
Modell | BB1131 | BB1226 | BB1142 |
Maks kuttestørrelse | 2600x700x680mm | 2600x1300x950mm | 4200x1300x950 mm |
Bladstørrelse | 3500x200x24mm | 3500x200x24mm | 4500x2000x24 mm |
Veneer thickness | 0.1-2.2mm | 0.1-2.2mm | 0.1-2.2mm |
Skjærehastighet | 0-36pcs / min | 0-36pcs / min | 0-36pcs / min |
Wood clamping unit | 10units | 10 enheter | 10units |
Clamping methods | Hydraulisk | Hydraulisk | Hydraulisk |
Total vekt | 22Tons | 24Tons | 32Tons |
Generell størrelse | 8030x4530x2530mm | 9530x5670x2470mm | 9550x5950x2990 mm |
Photos in User Factory
Maskindeler
Double V-chutes are used for both sides the machine, with high parallel; special polymer wear-resistant material coated on the surface.Machine runs in higher stability and with less friction.
Double V-chutes
transportbånd
Servo motor
Hovedtrekkene
Serve motor control system is used for timber feeding, guarantees the veneer thickness in a high precision, avoiding blade scratch on the timber
KONTAKT
Relatert produktinformasjon
-
Kryssfiner kjernefiner tørketrommel rulle finer tørketrommel for kryssfiner gjør linje kontinuerlig tørketrommel
-
Høy kapasitet industriell finer mesh beltetørker roterende kuttet bøk Continuous Mesh Finer Dryer
-
Horisontal type kryssfiner kjernefiner komponistmaskin
-
600T/800T flerlags hydraulisk kryssfiner finér varmpressemaskin kraftig automatisk trepressemaskin
-
Helautomatisk trebearbeiding kryssfiner skjærekant trimming sagemaskin
-
Finer peeling maskin kniv
-
Hydraulisk giljotinskæremaskin Finerklipper Trebearbeidingsmaskineri
-
Hel kryssfinerplante 3d
-
Høyeffektiv Kryssfinermaskin trestokkskjæringssag kryssfinermaskin
-
Finértørker for finér med stor kapasitet kontinuerlig tørkerulle for kryssfiner